Product Sections

Main Pages

New Products

FS-95V

FS-95V

£260.00

The first in a completely new series of four stroke engines. With its deliberately 'retro' styling reminiscent of the very first OS four strokes. The original ...
find out more

Zenoah Elec' Ignition - G23SLH, G26EI, G26SLH & G26SCM

Zenoah Elec' Ignition - G23SLH, G26EI, G26SLH & G26SCM

Glow start mains charger

Glow start mains charger

£6.50

!!<

  • Input - 240V AC 50Hz
  • Output - 1.2V/160mA
  • 3 Pin UK
>!! Only £4.20 when purchased with , see above for details.
find out more

Irvine C40H twin needle carb

Irvine C40H twin needle carb

£38.00

This is an excellent carb !!<

  • All metal construction
  • 13.5mm fitting and
  • 8mm venturi
  • it is held in place with two M3.5 screws supplied.
  • Japanese made
  • For 40 ...
    find out more

FS-62V

FS-62V

£212.00

The second engine in the new 'V' series of O.S. four strokes is targeted at both sports and scale modellers alike. Like he FS-95V, the FS-62V ...
find out more

CLAMP ON VICE 50MM JAWS

CLAMP ON VICE 50MM JAWS

£15.00

Diecast aluminium with plated jaws and bench clamp.
find out more

150mm STEEL RULE

150mm STEEL RULE

£2.70

Double sided with hang hole. Permanently etched graduations of cm/mm and inches, 1/8", 1/16", 1/32" and 1/64". Display packed.
find out more

10 BLADE METRIC FEELER GAUGE SET

10 BLADE METRIC FEELER GAUGE SET

£3.20

Set your tappets with ease. 100mm long taper blades. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Blade sizes: Metric: 0.05, 0.10, ...
find out more

65MM REACH X 75MM SPREAD TWIN LEG REVERSIBLE PULLER

65MM REACH X 75MM SPREAD TWIN LEG REVERSIBLE PULLER

£17.00

Make easy work of removing prop drivers and similar with this neat little puller with two reversible legs. suitable for external and internal pulling of gears, bearings, etc. Legs are forged ...
find out more

6 PIECE 140MM NEEDLE FILE SET

6 PIECE 140MM NEEDLE FILE SET

£6.50

Moulded plastic handles. packed in plastic storage wallet. Contains; flat parallel; flat taper; half round; round; square and three square files.
find out more

4 PIECE WARDING FILE SET

4 PIECE WARDING FILE SET

£6.50

Four handy files in a plastic wallet. Contains a flat parallel, round, square and three square (triangle).
find out more

125MM SPRING LOADED COMBINATION PLIERS

125MM SPRING LOADED COMBINATION PLIERS

£5.50

Induction hardened cutting edges. Incorporates a side cutter.
find out more

125MM CARBON STEEL BENT NOSE PLIERS

125MM CARBON STEEL BENT NOSE PLIERS

£6.50

Carbon steel, hardened and tempered with textured grips and captive double leaf springs. Jaws angled up to 30°. Display packed.
find out more

115MM SPRING LOADED DIAGONAL SIDE CUTTER

115MM SPRING LOADED DIAGONAL SIDE CUTTER

£5.50

Induction hardened cutting edges. Spring-loaded handles for user comfort. Display packed.
find out more

115MM SPRING LOADED LONG NOSE PLIERS

115MM SPRING LOADED LONG NOSE PLIERS

£5.50

Induction hardened cutting edges, side cutter and a spring-loaded soft handles for user comfort.
find out more

5 PIECE SOFT GRIP MINI PLIERS SET

5 PIECE SOFT GRIP MINI PLIERS SET

£26.00

A set of handy carbon steel hardened and tempered pliers. The jaws and cutting edges are induction hardened with captive double leaf springs and soft grip handles. Contains; flat nose pliers, ...
find out more

EXPERT 8 PIECE AF (imperial) HEXAGON KEY SET

EXPERT 8 PIECE AF (imperial) HEXAGON KEY SET

£8.00

Always have the full set when you need them! Manufactured from chrome vanadium steel hardened and tempered. Held in pocket knife style plastic holder with non-slip grip. Contents: 1/16, 5/64, ...
find out more

J'EN Heli Mini Pipes

Just Engines Online | Two Stroke Exhaust Systems |  J'EN Heli Mini Pipes

J'EN Heli Mini Pipes

J'EN Heli Mini Pipes

One piece mini pipes, with baffle for most popular engines and helis - so long as the crankshaft is pointing vertically!! We have drilled and tapped both sides of the silencer - so fit pressure nipple on one side and the 'blanking bolt' on the other. Read a customer review here.

  • One piece 'fit and forget';
  • Tuned for power increase;
  • Baffled for noise suppression;
  • Very linear throttling throughout range.
Please state engine make, model and size when ordering.

J'EN Heli Mini Pipe .32-.39  


Price: £28.58 (Including VAT at 20%)

Quantity:  

"If you are looking for noise reduction to a stock muffler shipped with most 30 size plastic models, this should be near the top of your list of options. I am extremely happy with it's performance and noise reduction..."

Click here for more customer comments.

Engine make, model & size:

People who bought this item also bought:
1. Exhaust Deflector Medium
2. Manual Glow Fuel Pump
3. Std Fuel Tube (3/32)

J'EN Heli Mini Pipe .40-.53  


Price: £39.70 (Including VAT at 20%)

Quantity:  



"I have used many pipes and mufflers over the years on heli's and can honestly say, for the money it is the best muffler I have used."

Click here for more customer comments.

Engine make, model & size:

People who bought this item also bought:
1. A.S.P. 0.40/0.46 Spares
2. Exhaust Deflector Medium
3. J'EN '4' Two Stroke Plug

J'EN Heli Mini Pipe .60-.71  


Price: £40.84 (Including VAT at 20%)

Quantity:  

Click here for customer comments.

Engine make, model & size:

People who bought this item also bought:
1. Exhaust Deflector Medium

J'EN Heli Mini Pipe .90-.91  


Price: £42.89 (Including VAT at 20%)

Quantity:  

Click here for customer comments.

Engine make, model & size:

J'EN Heli Mini Pipe YS 61/80/90  


Price: £45.95 (Including VAT at 20%)

Quantity:  

This is a variant of the .90 size version.

Engine make, model & size:

Just Engines Online | Two Stroke Exhaust Systems |  J'EN Heli Mini Pipes