Product Sections
Main Pages
New Products
FS-95V
The first in a completely new series of four stroke engines. With its deliberately 'retro' styling reminiscent of the very first OS four strokes. The original ...
find out more
Zenoah Elec' Ignition - G23SLH, G26EI, G26SLH & G26SCM
Glow start mains charger
!!<
Irvine C40H twin needle carb
This is an excellent carb !!<
FS-62V
The second engine in the new 'V' series of O.S. four strokes is targeted at both sports and scale modellers alike. Like he FS-95V, the FS-62V ...
find out more
CLAMP ON VICE 50MM JAWS
Diecast aluminium with plated jaws and bench clamp.
find out more
150mm STEEL RULE
Double sided with hang hole. Permanently etched graduations of cm/mm and inches, 1/8", 1/16", 1/32" and 1/64". Display packed.
find out more
10 BLADE METRIC FEELER GAUGE SET
Set your tappets with ease. 100mm long taper blades. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Blade sizes: Metric: 0.05, 0.10, ...
find out more
65MM REACH X 75MM SPREAD TWIN LEG REVERSIBLE PULLER
Make easy work of removing prop drivers and similar with this neat little puller with two reversible legs. suitable for external and internal pulling of gears, bearings, etc. Legs are forged ...
find out more
6 PIECE 140MM NEEDLE FILE SET
Moulded plastic handles. packed in plastic storage wallet. Contains; flat parallel; flat taper; half round; round; square and three square files.
find out more
4 PIECE WARDING FILE SET
Four handy files in a plastic wallet. Contains a flat parallel, round, square and three square (triangle).
find out more
125MM SPRING LOADED COMBINATION PLIERS
Induction hardened cutting edges. Incorporates a side cutter.
find out more
125MM CARBON STEEL BENT NOSE PLIERS
Carbon steel, hardened and tempered with textured grips and captive double leaf springs. Jaws angled up to 30°. Display packed.
find out more
115MM SPRING LOADED DIAGONAL SIDE CUTTER
Induction hardened cutting edges. Spring-loaded handles for user comfort. Display packed.
find out more
115MM SPRING LOADED LONG NOSE PLIERS
Induction hardened cutting edges, side cutter and a spring-loaded soft handles for user comfort.
find out more
5 PIECE SOFT GRIP MINI PLIERS SET
A set of handy carbon steel hardened and tempered pliers. The jaws and cutting edges are induction hardened with captive double leaf springs and soft grip handles. Contains; flat nose pliers, ...
find out more
EXPERT 8 PIECE AF (imperial) HEXAGON KEY SET
Always have the full set when you need them! Manufactured from chrome vanadium steel hardened and tempered. Held in pocket knife style plastic holder with non-slip grip. Contents: 1/16, 5/64, ...
find out more
J'EN Custom Manifolds - Customer CommentsCustomer comments and pictures of our J'EN custom manifolds. |
|
 TrevPromised you a couple of pics of the "custom manifold" along with Just 160 pipe you supplied recently along with Just spinner. This lot hanging on a OS 160FX makes for one very quick aeroplane. The plane is an 82ins span Hanger 9 Sundowner F1. Saying thank you is only a few words, I would like to say a "big big" thank you and express my appreciation for what you guys do for me up there. Always have been a bit of a speed freak and this one ticks all the boxes. Best regards to you all Trev. |
|
P. Anderson.Hi Jenny |
|
RichardThanks very much for my silencer, very quick service and a superb job. It fits lovely. |
|
|
SigurdurI have just received the side to rear manifold for my MVVS 1.60 and just to let you know that it turned out exceptionally well. It lined up perfectly straight, it just could not be made better :-) |
|
|
CliffordThe silencer is absolutely superb, thank you very much indeed, to say I'm pleased is an understatement !!.. The guys are really taken back at the quality / workmanship... |
|
|
QuestionsPlease ring, fax or email for more information or pricing, or if you can't see what you need. |
|
