The tiniest fully featured power panel you can get.
Just take a look at the features squeezed into this miniture panel :

• 1.2V glow plug with adjustable current;
• 1.25V Glostart charge terminal built -in;
• 12V starter/pump outlet;
• LED charge plus plug indicators;
• Reversed polarity protection;
• Machined aluminium fascia.

A low cost fully featured power panel with adjustable glow plug current and ammeter.

Supplied with battery connectors and leads plus matching banana plugs for your glow clip, fuel pump and starter.

Power all your electronic field equipment from one 12V battery.

• Built-in replaceable fuel pump with 3 position switch;
• Variable control knob & ammeter to adjust plug current;
• Built-in Glow Start charge socket;
• 1.5V pulse power to glow plug & Starter socket.

Outputs for 12V starter and fuel pump with fill and drain; adjustable glow driver with LCD current display. There is even a power source condition LED with red signifying a charge is needed to source. That’s not all! There is a TX/RX 'Top Up' charger and a 60 min timed glow start charger and even a built-in battery tester. This really is the most complete panel!

A low cost 'peg' type glow clip.

Supplied pre-wired and complete with long leads and crocodile clip connectors. Suitable for all normal glow plugs and many engines fitted with glow leads.

A simple 'peg' type glow clip made even more useful with the addition of a handy plug condition checker. No light - the plugs blown. Simple! Supplied pre-wired with battery connectors.

Please note requires a 12V battery and/or power panel to function, it will not power from a nicad.

Lock on Glow Clip (short - 65mm) with leads and insulated crocodile battery connectors.

Lock on Glow Clip (long - 90mm) with leads and insulated crocoldile battery connectors.

1.2V Glo Start lock on clip with on board nicad (1800mAh) and meter.

1.2V Glo Start lock on clip with on board nicad (1800mAh) including glow meter and charger.

Remote glow lead which uses a 'dummy' plug which is positioned away from the engine.

Ours is extra long - 320mm of lead and is supplied complete with earth lead.

Glow connector like a mini spark plug lead. For use with remote/onboard systems

A basic plug spanner for simple fitting and removing glow plugs

An internal clip in the long arm of this spanner holds plugs tight for easy installation and removal. A very useful bit of kit.

A small engine can give a nasty cut - a large one can easily break a finger. This rubber finger guard has a durable ribbed construction to help protect you if you prefer to hand start your engines.

This baby has started everything we have thrown at to date including a Fuji 50cc ; Moki 2.10; Zenoah 45cc and 1.80 Four Stroke! It weighs only 1080g and is 170mm long and 46mm in diameter. Easily the best value geared starter on the market today. Geared 1:4.

Designed for tougher applications such as ducted fans; large model boats and helicopters the Dynatron packs a massive punch. Can also be run on 24v batteries for even more power.

The original geared starter.
Very small and light but surprisingly powerful.

Supplied with leads and clips.

Don't wreck your spinner when your starter rubber is past it's useful life. This low cost insert is suitable for the majority of starters and it is reversable for direct starting on the prop nut if no spinner is used.

This starter rubber is made by Sullivan and is ideal for their starters. It is also suitable for the majority of other starters available today. It is high quality and reversible for starting with spinners or with prop nuts.