Product Sections
Main Pages
New Products
JEN Upright / Inverted .40-.57 Muffler
37mm hole centres for OS, Irvine, J'EN, ASP and other OS copies .40-.57. Supplied with fixing bolts. Dimensions a = 75mm. b = 48mm. c = 20mm. ef = ...
find out more
Genesis Pusher Pipe 40 to 57
Genesis Pusher Pipe .40 to .57 Engines - 37mm exhaust fitting
find out more
Single Ignition for Glow Plug Thread
Supplied with 2 sizes of sensor holder, hall effect sensor and cable tidy for the wiring. Battery, spark plug and magnet not included.
find out more
J'EN 1.60 (26cc) Petrol Engine
After months spent in testing and developing we are now very proud to present our first J'EN Petrol Engine. Its main features: !!<
JEN .91
The .60 that knows it's a .90! This is the Jen .91 MK 2, now with retimed liner, baffled silencer and improved compression ratio and still only £79.99! !!<
Smoke System for 2 Strokes
This is a very straight forward smoke system that is powered by a Perry pump. No need for batteries and therefore no need for wiring and charging. This ...
find out more
Leo GeneralThese Leos are really very nice. Every one we've had has been great. Pete Tindal (Pete Tindal's Airplanes) |
Leo 28Thank you for supplying the LEO 28 engine, it is running absolutely great. Experimenting with plug and fuel, although running well on Castor Straight, but for best performance I use 5% nitro. Thanks once again. Chris Crawford |
Leo 37Thanks for the Leo 37 - it's BRILLIANT!! and has impressed a lot of people Nick Vining |
Leo 37 HeliFirst impressions: nice looking engine with excellent finish on outside. I like the blue heat sink head. Finish as good as major Japanese engine supplier!. It fitted into my Raptor like it was made for it, and I am using Hatori tuned pipe with OS glow plug and Irvine 'contest 10' fuel. Starts straight away... carb has excellent tickover and pickup very very good, with plenty of power and has transformed the handling of my Raptor...... climb out is amazing, it just keeps going. It's a dramatic improvement on my previous engine which was a .38. My only criticism is that I wish I had known about the LEO .37 before I bought my previous engine!! Andy Pemberton |
Leo 46I purchased a Leo 46 from you on the 2 May 2000. I was very sceptical at first being of Chinese origin. Having operated the engine run it in as specified I am pleased and impressed with its performance. Bags of power, smooth running good transition from idle to pickup to full power. Above all else I am amazed at its noise level. My ears were straining to hear it! Fellow modellers at the club HWMAC are interested in the engine too. It would seem that you have done your homework on this one. Regards Roger Gillett |
Leo 61The best money I've ever spent! Mr P. Rodrigues |
QuestionsPlease ring, fax or email for more information or pricing, or if you can't see what you need. |