Product Sections
Main Pages
New Products
FS-95V
The first in a completely new series of four stroke engines. With its deliberately 'retro' styling reminiscent of the very first OS four strokes. The original ...
find out more
NGH GT9
This is the latest in the growing line up and as far we know the smallest production petrol engine. So small in fact there was not ...
find out more
Keleo collector ring
Keleo collector ring for ASP 400R also fits Magnum, SC and PH. These are hand made in the USA all welded aluminium. The are designed to screw directly into the ...
find out more
High temperature tube for smoke systems (50cm)
This neoprene tube is good for connecting to smoke injectors where other tube can melt. 50cm length
find out more
Zenoah Elec' Ignition - G23SLH, G26EI, G26SLH & G26SCM
Glow start mains charger
!!<
Irvine C40H twin needle carb
This is an excellent carb !!<
FS-62V
The second engine in the new 'V' series of O.S. four strokes is targeted at both sports and scale modellers alike. Like he FS-95V, the FS-62V ...
find out more
CLAMP ON VICE 50MM JAWS
Diecast aluminium with plated jaws and bench clamp.
find out more
150mm STEEL RULE
Double sided with hang hole. Permanently etched graduations of cm/mm and inches, 1/8", 1/16", 1/32" and 1/64". Display packed.
find out more
10 BLADE METRIC FEELER GAUGE SET
Set your tappets with ease. 100mm long taper blades. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Blade sizes: Metric: 0.05, 0.10, ...
find out more
65MM REACH X 75MM SPREAD TWIN LEG REVERSIBLE PULLER
Make easy work of removing prop drivers and similar with this neat little puller with two reversible legs. suitable for external and internal pulling of gears, bearings, etc. Legs are forged ...
find out more
6 PIECE 140MM NEEDLE FILE SET
Moulded plastic handles. packed in plastic storage wallet. Contains; flat parallel; flat taper; half round; round; square and three square files.
find out more
4 PIECE WARDING FILE SET
Four handy files in a plastic wallet. Contains a flat parallel, round, square and three square (triangle).
find out more
125MM SPRING LOADED COMBINATION PLIERS
Induction hardened cutting edges. Incorporates a side cutter.
find out more
125MM CARBON STEEL BENT NOSE PLIERS
Carbon steel, hardened and tempered with textured grips and captive double leaf springs. Jaws angled up to 30°. Display packed.
find out more
115MM SPRING LOADED DIAGONAL SIDE CUTTER
Induction hardened cutting edges. Spring-loaded handles for user comfort. Display packed.
find out more
|
|
|
|
|
|
|
|
|
|
|
|
|
