On Board Glow System

We've been searching since we started Just Engines, to find an on board glow system we could put our name 'behind' (and strongly recommend).

At last - we've found one...........

I just can't praise this amazing, small, light and easy to use, fully automatic system enough............

• Fully automatic - no adjustments needed;
• Small and Light - 20g weight in total inc all the wiring!!)
• Senses your Tx servo reverse position - just turn your Tx on with idle trim set at the engine's idling position
• Fully Proportional - to save nicad drain and maximise plug life; 100% on at engine idle position - reducing current as you open the throttle until it finally 'cuts off' when engine is at ~ 1/3rd throttle. As you lower throttle from full throttle downwards - comes 'back in' when throttle down to ~ 1/3 and then proportionally increases the glow until 100% on, when the engine is idling. And - when you close your throttle trim down (to stop the engine) - the unit turns the glow off!!