Just Engines Online

HomeSite MapSearchCheckout Store TopUp a LevelContact Us

Product Sections

Main Pages

New Products

Opto Petrol Engine Kill Switch

Opto Petrol Engine Kill Switch

£14.99

This is a must have for petrol engine users, the engine can be switched off via this unit which remotely kills the electronic ignition from a spare servo channel. The ...
find out more

Moki 1.80 petrol

Moki 1.80 petrol

£250.00

We have just received a very limited number of the original Moki 1.80 petrol engines made by the genuine Hungarian factory. Fans of the Moki engines will already know that ...
find out more

Fibreglass Spinner

Fibreglass Spinner

PRICED TO CLEAR Fantastic, light, fibreglass spinners with bolt and dural backplate, in a neutral colour for painting to match your model. Weights are listed in brackets ...
find out more

ASP 52 Ringed Heli Engine

ASP 52 Ringed Heli Engine

£69.99

Brand new ASP 52 ringed heli engine for all those 50 size models, this new engine has a ringed piston which is preferable for heli use, it has a twin needle ...
find out more

ASP S15

ASP S15

£38.32

New - We are pleased to announce the completely new S15 aero engine, this is a newly designed engine using all new parts. The crankcase has increased ...
find out more

ASP 0.40 S Short engine

ASP 0.40 S Short engine

£34.99

NEW - In response to customer demand we are offering this engine as a 'short' engine, without carburettor (inc needle assembly) and silencer, this offer will initially be for a limited ...
find out more

Sensor Test Kit

Sensor Test Kit

£11.23

This ingenious little gadget really makes life easier when installing magnets and checking timing. It allows you to check and set your static timing ...
find out more

RC Carbs

Just Engines Online | Accessories |  RC Carbs

Replacement carbs for R/C engines

We stock all the leading makes of R/C carburettor (for the engines we sell) and some compatibles for you to consider....with full spares support

Why buy a compatible?

  • to increase performance
  • for a special application (eg Aerobatics, or High Speed flying)
  • when you're using a fuel pump and the original carb. is not suitable
  • when your engine is old and a manufacturers' carb. is not available anymore or cost effective
  • to improve the reliability of your engine, if the original manufacturers' carb. is poor
  • to convert your C/L, U/C or F/F engine cost effectively to R/C
A customer recently commented:

"Your carb has done the trick the MDS ran solidly for two 40 minute all angles aerobatic flights yesterday with no stopping or response problems at all and a noticeable improvement in full throttle."
Paul; Ipswich Radio Control Model Club.

Series 3 Twin Needle Carburettor for 25 size engines

Series 3 Twin Needle Carburettor for 25 size engines


Price: £14.99 (Including VAT at 17.5%)

Quantity:

This twin needle carburettor has a 12mm diameter fitting into engine, it is drilled to take 2 x M3 bolts at sides but can of course be fitted in a pinch bolt style crankcase also. The venturi is 6mm bore.


JEN 'TN2' 8mm venturi Carb

JEN 'TN2' 8mm venturi Carb

Quantity:

Fitting Select

JEN 'TN2' - Latest version of the very popular TN twin needle carb

  • 8mm Venturi
  • Twin Needle (Internal bottom end needle)
  • Metal throttle arm
  • Superb value
  • Spares available (and cost effective)


People who bought this item also bought:
1. A.S.P. 52/61 FS Spares
2. A.S.P. 120 FS Spares
3. JENSD47 Standard Silencer

ASP Series '3' 7.5mm venturi Carb with 13.5mm fitting

ASP Series '3' 7.5mm venturi Carb with 13.5mm fitting


Price: £17.50 (Including VAT at 17.5%)

Quantity:

ASP Series '3' 7.5mm venturi carb - for .40-.58, 13.5mm fitting, retained by 2 screws.

Reliable and simple to use twin needle carb with internal idle needle.

People who bought this item also bought:

1. A.S.P. 0.40/0.46 Spares
2. IRVINE 36 MK.II RING HELICOPTER Spares
3. 4mm Magnet

ASP Series '3' 9.5mm venturi Carb with 15mm fitting

ASP Series '3' 9.5mm venturi Carb with 15mm fitting


Price: £20.00 (Including VAT at 17.5%)

Quantity:


ASP Series '3' 9.5mm venturi carb - for .61-1.08, 15mm fitting.

Reliable and simple to use twin needle carb with internal idle needle.

People who bought this item also bought:

1. OS No 8 Two Stroke Plug
2. Rubber Starter Insert
3. APC 13x8

ASP Series '3' 11mm venturi Carb

ASP Series '3' 11mm venturi Carb

Quantity:

Fitting Select

ASP Series '3' 11mm venturi carb - for 1.20-1.80.

Reliable and simple to use twin needle carb with internal idle needle.

People who bought this item also bought:

1. Regulating Perry Pump for Petrol or Smoke
2. APC 16x12
3. 4mm Magnet

Series '3' RN 7.5mm venturi Carb with 13.5mm fitting

Series '3' RN 7.5mm venturi Carb with 13.5mm fitting


Price: £12.50 (Including VAT at 17.5%)

Quantity:




Series 3 RN Carb. .40 - .50 Sizes, 13.5mm fitting retained by 2 screws, venturi 7.5mm.

Carb only (no needle).

People who bought this item also bought:

1. ASP Series '3' RN Assembly for .40 - .50 engines
2. 6 Shooter Glow Pump
3. 3 x Std Fuel Filter

Series '3' RN 9.5mm venturi Carb with 15mm fitting

Series '3' RN 9.5mm venturi Carb with 15mm fitting


Price: £14.99 (Including VAT at 17.5%)

Quantity:




Series 3 RN Carb. .60 - .90 Sizes, 15mm fitting retained by 2 screws, venturi 9.5mm.

Carb only (no needle).

People who bought this item also bought:

1. ASP Series '3' RN Assembly for .60 - .90 engines
2. Glass Filled Nylon 4s .60 to .90 Mount
3. Exhaust Deflector Medium

ASP Series '3' RN Assembly for .40 - .50 engines

ASP Series '3' RN Assembly for .40 - .50 engines


Price: £9.95 (Including VAT at 17.5%)

Quantity:

Remote Needle Assembly for .40 - .50 engines - designed to fit on ASP backplates.

Some modification may be necessary for use with other brands.

People who bought this item also bought:

1. A.S.P. 0.40/0.46 Spares
2. Series '3' RN 7.5mm venturi Carb with 13.5mm fitting
3. 2 Blade Aluminium Spinner

ASP Series '3' RN Assembly for .60 - .90 engines

ASP Series '3' RN Assembly for .60 - .90 engines


Price: £9.95 (Including VAT at 17.5%)

Quantity:

Remote Needle Assembly for .60 - .90 engines - designed to fit on ASP backplates.

Some modification may be necessary for use with other brands.

People who bought this item also bought:

1. Series '3' RN 9.5mm venturi Carb with 15mm fitting
2. One Way Valve
3. Glass Filled Nylon 4s .60 to .90 Mount

Questions

Please ring, fax or email for more information or pricing, or if you can't see what you need.
Tel: 01228 712800, Fax: 01228 712800, Email: justengines@enterprise.net

Just Engines Online | Accessories |  RC Carbs

Just Engines, Registered in England, no: 4846519, Registered office; Newby Cross Farm, Newby Cross, Carlisle, CA5 6JP

© 2009 Just Engines  Contact Us | Privacy Policy | Terms & Conds