Product Sections

Main Pages

Just Engines Home Page

Just Engines Infomation

Just Engines Model Fuel Info

Just Engines Links

New Products

FS-95V

£260.00

The first in a completely new series of four stroke engines. With its deliberately 'retro' styling reminiscent of the very first OS four strokes. The original ...
find out more

Zenoah Elec' Ignition - G23SLH, G26EI, G26SLH & G26SCM

£17.50

find out more

Glow start mains charger

£6.50

!!<

Input - 240V AC 50Hz
Output - 1.2V/160mA
3 Pin UK

>!! Only £4.20 when purchased with , see above for details.
find out more

Irvine C40H twin needle carb

£38.00

This is an excellent carb !!<

All metal construction
13.5mm fitting and
8mm venturi
it is held in place with two M3.5 screws supplied.
Japanese made
For 40 ...
find out more

FS-62V

£212.00

The second engine in the new 'V' series of O.S. four strokes is targeted at both sports and scale modellers alike. Like he FS-95V, the FS-62V ...
find out more

CLAMP ON VICE 50MM JAWS

£15.00

Diecast aluminium with plated jaws and bench clamp.
find out more

150mm STEEL RULE

£2.70

Double sided with hang hole. Permanently etched graduations of cm/mm and inches, 1/8", 1/16", 1/32" and 1/64". Display packed.
find out more

10 BLADE METRIC FEELER GAUGE SET

£3.20

Set your tappets with ease. 100mm long taper blades. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Blade sizes: Metric: 0.05, 0.10, ...
find out more

65MM REACH X 75MM SPREAD TWIN LEG REVERSIBLE PULLER

£17.00

Make easy work of removing prop drivers and similar with this neat little puller with two reversible legs. suitable for external and internal pulling of gears, bearings, etc. Legs are forged ...
find out more

6 PIECE 140MM NEEDLE FILE SET

£6.50

Moulded plastic handles. packed in plastic storage wallet. Contains; flat parallel; flat taper; half round; round; square and three square files.
find out more

4 PIECE WARDING FILE SET

£6.50

Four handy files in a plastic wallet. Contains a flat parallel, round, square and three square (triangle).
find out more

125MM SPRING LOADED COMBINATION PLIERS

£5.50

Induction hardened cutting edges. Incorporates a side cutter.
find out more

125MM CARBON STEEL BENT NOSE PLIERS

£6.50

Carbon steel, hardened and tempered with textured grips and captive double leaf springs. Jaws angled up to 30°. Display packed.
find out more

115MM SPRING LOADED DIAGONAL SIDE CUTTER

£5.50

Induction hardened cutting edges. Spring-loaded handles for user comfort. Display packed.
find out more

115MM SPRING LOADED LONG NOSE PLIERS

£5.50

Induction hardened cutting edges, side cutter and a spring-loaded soft handles for user comfort.
find out more

5 PIECE SOFT GRIP MINI PLIERS SET

£26.00

A set of handy carbon steel hardened and tempered pliers. The jaws and cutting edges are induction hardened with captive double leaf springs and soft grip handles. Contains; flat nose pliers, ...
find out more

EXPERT 8 PIECE AF (imperial) HEXAGON KEY SET

£8.00

Always have the full set when you need them! Manufactured from chrome vanadium steel hardened and tempered. Held in pocket knife style plastic holder with non-slip grip. Contents: 1/16, 5/64, ...
find out more

OS Compatible Spares

Just Engines Online | Engine Spares | Two Stroke Spares | OS & OS Compatible Two Stroke Spares | OS Compatible Spares

OS Compatible Spares

Compatible spares (not made by O.S.) sourced, tested (and approved) by Just Engines.

OS FX Compatible Spares

Calling ALL O.S. FX owners.........

We now have replacement Piston & Liner set at very attractive prices, so now you can rebuild and recondition that faithful engine, without the price breaking the bank!!.....

and they work!

Customer Comments

1) We invited a local modeller (and O.S. fan) Mike Russell (Bracknell M.A.C.) to lend us his 1 year old (used probably most weekends) O.S. 46FX. We set it up on our test bench with a balanced APC 11x6 prop, O.S. no8 plug and used our normal test fuel (17% oil, 5% nitro). It was a cold damp day and the rpm recorded was 11,200.

We then replaced Mike's piston and liner with our version - and after only 2 tanks of running in (on the same day) recorded the same rpm, 11,200.

We then took the piston and liner back out of the 46FX and built one of our CHOS46FX 'short' engines. We re-used Mike's carb, backplate assembly and silencer and put it back on the test bench. Same fuel plug and prop (on the same day) and recorded 11,600 rpm!! (on an APC 10x6 the rpm was 13,600!!)

Why? - because our crankcase uses better matched internal porting and therefore has better gas flow!!

Let's just say we thanked each other for the experiment - and Mike left with our engine!!

2) A recent .40FX we serviced (and used our Piston/Liner) ran up (1st tank) with an APC 10x6 to 13,000. The customer took it away before the engine had chance to cool!!

3) David from Australia writes 'I received my CHOS46FXPL today (6 days international) and just wanted to say how impressed I am at the prompt attention and fantastic customer service. Your reputation is well deserved.'

Questions

Please ring, fax or email for more information or pricing, or if you can't see what you need.
Tel: 01747 835817, Fax: , Email: justengines@enterprise.net

Just Engines Online | Engine Spares | Two Stroke Spares | OS & OS Compatible Two Stroke Spares | OS Compatible Spares